Product Specification:

For safe operation of Hand Pallet Truck, please read the following instructions:

• Do not operate a Hand Pallet Truck until you have checked its condition. 

• Give special attention to the wheels, handle, forks, lift and lower control, and brakes (if so equipped ).

• Do not operate damaged or faulty trucks. Do not attempt repairs unless you are trained and authorized to do so.

• Operate Hang pallet Trucks only from the designated operating position. 

• Never place any part of your body in the lifting mechanism or under the forks or load. 

• Do not carry passengers.

• Do not handle unstable or loosely stacked loads. 

• Use special care when handling long, high, or wide loads to avoid losing the load, striking by standers, or tipping the truck.

• Do not overload the truck. Check capacity plate for caring capacity information, Overloading. may cause truck to perform incorrectly.

• The capacity of the truck assumes an evenly- distributed load with the center of the load being at the halfway point of the length of the forks.

• Make sure that length of the forks match the length of the pallet.

• Lower the forks to lowest high when the truck is not to be used.

• Hand Pallet trucks are for general operation on level, flat hard surfaces. 

• If ramps are encountered the optional hand brake can be ordered, or the truck may be operating the towering come? anciles Din owner load to the ground. 

• Stopping the truck. if the truck must be stopped in this manner, care. should be taken so that no part of your body is near or under the load. 

• It is important not to operate a Hand Pallet Truck on a grade with loads that are, too heavy to be easily handled by the operator. 

• Since these are manually operated trucks, they are not to be used by operators that are not physically capable of safely handling the trucks with a load.